Water Tank Application (Huaheng)

Water Tank Application (Huaheng)

High Precision TIG、Plasma or Plasma + TIG Longitudinal and Circumferential Seam Welding System.

Lebih detail

High Precision TIG、Plasma or Plasma + TIG Longitudinal and Circumferential Seam Welding System
Welding Process: TIG/PAW/P+T 
Material: Stainless Steel 
Diameter: ≤¢3200mm 
Length: ≤6500mm 
Joint Type: Longitudinal Seam, and Circumferential Butt or Overlap Seam 

 

Features:


 The automatic welding system is specially designed for stainless steel application. With Plasma welding process, the key hole penetration effect makes sure one-side welding double-side shaping, as well as higher welding speed and higher welding efficiency;  
 Using Plasma + TIG double torches welding at one time, Plasma for root pass at front, TIG for covering pass after, highly improving the welding quality and efficiency, which can reach 1.3~1.5 times the efficiency of single torch welding;
 Mainly for vessels of thin-wall thickness less than and equal to 8mm , there is no need for beveling. It can weld single side with double side shaping. For wall thickness greater than 8mm, a little beveling is needed.
 With the advantage of key hole penetration, there is no bevel with plate wall thickness of 8mm and below, saving time and money on preparation; 
 The energy of arc is much concentrated that the heat effect zone is smaller, thus reducing distortion; 
 With the benefit of high efficiency, it can save the time of using plasma by 4~5 times as compared with manual welding;
 Modular design, less modification design and production cycle; 
 Huaheng has more than ten years of Plasma application experience in terms of excellent welding process and service ability;
 Turn-key project;