Regula EWR-PRO MIG/MAG

Regula EWR-PRO MIG/MAG

„Weld more efficiently – optimise shielding gas consumption.“, The Regula EWR-PRO MIG/MAG reduces your gas consumption by up to 60%.

Lebih detail

Regula EWR-PRO MIG/MAG is the name of our patented regulator for MIG/MAG welding. Beside the unit itself the package includes a shunt for welding up to 300 Amp and a power supply for between 100V to 230VAC which comes with an adapter for ether Euro, UK, USA, Australia, Japan etc. The package also includes an installation manual.

It is also possible to get a shunt for welding up to 500 Amp and there is a converter for power supply between 20 to 48V AC or DC.
The Regula EWR-PRO MIG/MAG gas regulator is the result of a unique patented technology from Regula Systems AB.
It regulates the gas flow according to the Amperage that is being used when welding, it measures the Amperage thru the shunt and adjusts the gas flow automatically while welding, it works with an incoming gas pressure of between 2-6 bars and delivers a gas flow between 5-30 liter/min.
It is very easy to optimize for your welding procedure and environment by using the buttons on the front panel. 
The Regula EWR-PRO MIG/MAG is programmed for usage of Regula´s accessories (see accessories for MIG/MAG).

 

Technical data:

REGULA® EWR BASIC/PRO MIG/MAG

Weight: approx. 1.3 kg

Measurements LxWxH: 118x148x58 mm

Electrical connection: 24 VDC, 450 mA – 750 mA

Outgoing idle flow: 0.2–2.0 bar: 5.0–23.0 l/min

Flow rate:5.0–30.0 l/min10.6–63.0 cfh

In-/Outgoing pressure: Ingoing pressure ↔ Outgoing pressure

2–6 bar ↔ to 0.6 bar

3–6 bar ↔ to 1.2 bar

4–6 bar ↔ to 2.0 bar

(If pressure is below 1 bar the EWR shuts off)

Working range of

measuring shunts:Shunt ↔ Working range

150 A ↔ 45–150 A

300 A ↔ 90–300 A

500 A ↔ 150–500 A