Test

THERMA DYNA MIG 400M

THERMA DYNA MIG 400M

Multi purpose Application, the machineprovides varying functions suitable for the MIG / MAG welding , MMA welding, FCAW,  Aluminum welding, Arc Gouging and for TIG welding with TIG function.

spesial offer



Lebih detail

-Good Start and Burn Back Device ,the power source equipped with a self adaptive start feature to control wire feed speed during arc starting, burn back device removes the tip ball after welding for a good and smooth start

-Low spatter for mild steel, stainless steel, and aluminum

-Optional Water Cooling System suitable for gouging only up to 6mm

 

 Specifications THERMA DYNA MIG 4000M
Power supply voltage (V)  300 - 450
Frequency   50 Hz
Rated input power (KVA) MIG: 14.4, TIG (scratch): 10.4, MMA: 14.4
Rated input current (KVA) MIG: 28, TIG (scratch): 22, MMA: 28
Duty cycle (at 40°C) 100%        MIG: 400A        MMA: 400A
No load voltage (V) MIG: 59, TIG (scratch): 75, MMA: 75
Welding current range (A) MIG: 60-400, TIG (scratch): 10-400, MMA: 10-400
Welding voltage range (V) MIG: 17-34        MMA: 20.4-36
Efficiency (%) 0.89
Power factor 0.95
Wire diameter (mm)

MIG: 0.6-1.6 (Fe), TIG (scratch): 0.6-1.6 (SS),

MMA: 1.2-1.6 (Al)

Net weight (kg) 59
Dimensions (power source) 780 x 370 x 590
Dimensions (package of power source) 820 x 390 x 640
Dimensions (package of wire feeder) 680 x 330 x 450
Protection class IP23
Insulation class F
Cooling Air cooling
Gouging only up to 6mm