TS 350 YSX BC

TS 350 YSX BC
  • Arc welding source in D.C. welding
  • Welds any type of electrode, including cellulosic
  • Electronic regulation of welding current
  • Special BC (Base Current) circuit for pipes descending welding
  • Double welding range (HALF/FULL - 50% / 100%)
  • A.C. generator, single-phase and three-phase
  • Aux power also available while welding
  • Engine Diesel YANMAR water cooling
  • Engine protection EP7
  • Emergency Stop button
  • Bunded base
  • Site tow CTL400 (on request)
  • Welding remote control (optional)
  • Meets EC directives for noise and security

 

Standard equipment

  • Diesel Engine
  • Water Cooling
  • Battery 12V
  • Fuel level gauge
  • Hours-meter
  • Engine protection
  • Electric starter
  • Low press. shutdown
  • High temp. engine shutdown
  • Battery charge shutdown
  • Low fuel shutdown
  • Warning light for preheating glow plug
  • Welding current electr. Regulation
  • Base current diode bridge
  • Socket 3~
  • Socket 1~
  • Output 48 V
  • Ground fault interrupter
  • Thermal shut off
  • Voltmeter
  • Emergency stop button
  • Ready for TC
  • Central lifting eye

 

Options on request

  • 400V Plug
  • 230V Plug
  • 110V Plug
  • Tank locking cap
  • Welding cables: K400 (20+15m, 50mm2)
  • Remote control RC2 (cable 20m) - RC2 90°(cable 20m)
  • Remote control RCPL (with polarity change switch - cable 20m)
  • Welding kit (mask, gloves, etc.)
  • Remote control adaptor RC/TC
  • Earthing kit
  • Site tow CTL400
  • Road trolley CTV4

 

Version on request

  • Auxiliary output: 400Y - 230I - 48I : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE
  • Auxiliary output: 400Y - 230I : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE - 2x230V 16A 2P+T CEE
  • Auxiliary output: 400Y - 230I - 110I CTE : 1x400V 32A 3P+N+T CEE - 1x230V 16A 2P+T CEE - 1x110V 32A 2P+T CEE - 1x110V 16A 2P+T CEE

 

Factory installation option

  • Auto Idle - Economiser function
  • Isometer
  • Polarity change
  • Schuko sockets
  • Spark arrestor

 

Technical data

D.C. WELDING (Costant Current)

Current range, continuous: 20÷350 A

Service: 350A-35%; 320A-60%; 270A-100%

Duty cycle: 65 V

A.C. GENERATION - 50Hz: Three-phase asyncronous alternator, self-regulated, self-excited, brushless

Three-phase generation: 12 kVA / 400 V / 17.3 A

Single-phase generation: 7 kVA / 230 V / 30.4 A

Single-phase generation: 3.5 kVA / 110 V / 31.8 A

Single-phase generation: 5 kVA / 48 V / 104 A

Insulation class : H

ENGINE: Diesel, 4-stroke, direct injection, air cooled

Model: Yanmar 3 TNV 76

*Output: 16.5 kW (25.4 HP)

Speed: 3000 rpm

Displacement / Cylinders :116 cm3/ 1

Fuel consumption (welding 60%): 3.4 l/h

*Maximum output (not overloadable) according to ISO 3046-1

GENERAL SPECIFICATIONS

Tank capacity: 45 l

Running time (welding 60%): 13 h

IP protection degree: IP 23

*Dimensions LxWxH (mm): 1610x720x1110

*Dry weight: 535 kg

**Measured acoustic power LwA (pressure LpA): 92 dB(A) (67 dB(A) @ 7m)

**Guaranteed acoustic power LwA (pressure LpA): 93 dB(A) (68 dB(A) @ 7m)

*Dimensions and weight without trolley/trailer. **Acoustic power according to European Directive 2000/14/EC