Test

Purge- and connection block SBE/3

Product features

  • Purge- and connection-block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,3 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • Check valve at the purge gas inlet 
  • Available with pressure gauge (for low vapour pressure gases), with pressure regulator (mounted onto the purge block) or for use with a pressure control panel, using a flexible pigtail connection
  • Suitable for ECD applications
Technical data
Inlet pressure P1 max. 200 bar  
Materials
Body:
Diaphragm:
Valve seat:

stainless steel 1.4404
stainless steel 1.4310
PVDF
 
In- and outlets 1/4"-18 NPT female
Leak rate < 1 x 10-8 mbar l/s He
Cv-value 0,08
Weight 1,6 kg (with pressure gauge)