DSP 400 YSX CHOPPER TECHNOLOGY

DSP 400 YSX CHOPPER TECHNOLOGY
  • High frequency Digital Control of welding current
  • Multi process welder:

   - SMAW:Shielded Metal Arc welding (Stick)

   - GMAW: Gas Metal Arc Welding (MIG)

   - FCAW: Flux Cored Arc Welding (Flux Cored)

   - GTAW: Gas Tungsten Arc Welding (TIG) - Contact starting

  • Low welding current range (50%) in C.C. mode
  • EP7 engine shutdown (oil pressure/high temperature/low fuel/battery charge
  • Auxiliary power (up to 12 kVA)
  • Bunded base
  • Large fuel tank (45l)
  • Yanmar, water cooled diesel engine
  • Meets EEC directives
  • EPA-EURO 2 compliant

 

Standard equipment

  • Diesel Engine
  • Water cooled
  • Engine protection and econimizer
  • Electric starter
  • Engine shutdown battery charge
  • Engine shutdown low fuel gauge
  • Warning light for preheating glow plug
  • Battery 12V
  • Welding current electr. Regulation
  • Base current diode bridge
  • Voltmeter
  • Ground fault interrupter
  • Thermal circuit breaker
  • Emergency stop button
  • Ready for TC
  • Central lifting eye

 

Options

  • Plugs
  • Welding cables K400 (20+15m, 50mm2)
  • Remote control TCPL4 with cable 20m
  • Earthing kit MT10
  • Site tow CTL400
  • Road tow CTV4

 

Factory installation

  • PL: Polarity Change
  • VRD Voltage Reduction Device
  • Isometer only for: 400T 230Mx3 CEE/Schuko
  • Isometer only for: 400T 230M 110DC
  • Kit schuko
  • Auto Idle
  • Spark arrestor muffler

 

AUX Version

  • 400T (32A)-230 (32A)- 230x2 16A (Schuko)
  • 400T (32A)-230 (32A)- 48V
  • On request 60Hz Versions

 

Technical data

D.C. WELDING - SMAW (Stick)/ GTAW (TIG) - COSTANT CURRENT (C.C)

Contact starting (TIG)

Current range: 10 - 400A

Open circuit voltage: 65 V

Duty cycle: 400A-35%; 350A-60%; 300A-100%

D.C. WELDING - GMAW (Mig)/ FCAW (Flux Cored) - COSTANT VOLTAGE (C.V)

Voltage Range: 15 - 40V

Duty cycle: 350A-60%; 300A-100%

A.C. GENERATION : 50 Hz, asynchronous, three-phase, self-excited, self-regulated, brushless

Three-phase generation: 12 kVA / 400 V / 17.3 A

Single-phase generation: 7 kVA / 230 V / 30.4 A

Single-phase generation: 3.5 kVA / 110 V / 32 A

Duty cycle: 100%

Insulation class: H

ENGINE: Diesel, 4-stroke, water cooled

Model: YANMAR 3 TNV 76

Output*: 16.5 kW (22.3 HP)

Speed: 3000 rpm

Displacement: 1116 cm3

Cylinders: 3

Fuel consumption (welding 60%): 306 g/kWh

*Maximum output (not overloadable) according to ISO 3046/1

GENERAL SPECIFICATIONS

Tank capacity: 45 l

Running time (at duty cycle 60%): 13 h

IP protection degree: IP 23

Dimensions LxWxH (mm)*: 1570x720x1100

Weight*: 535 kg

Measured acustic power **: 93 LWA (68 dB(A) - 7m)

Guaranteed acustic power **: 94 LWA (69 dB(A) - 7m)

*Dimensions and weight are inclusive of all parts without wheels and towbar ** Acustic power according to 2000/14-CE