TS 200 DS-DES/CF

• Arc welding source in D.C. welding
• Welds any type of electrode, including cellulosic
• Double welding output (20-100A / 90-190A)
• A.C. generator, single-phase and three-phase
• Ground fault interrupter
• Output sockets: 1x400V 16A 3P+N+T CEE

                             1x230V 16A 2P+T CEE - 1x48V 32A 2P CEE

• YANMAR diesel engine
• Manual recoil (DS) - Electric starter (DES)
• Protective frame
• Trolley CTM (on request)
• Meets EC directives

Standard equipment

• Diesel Engine
• Air Cooling
• Manual Recoil
• Electric starter
• Battery charge alarm (only DES)
• Low press shut down (only DES)
• Asynchronous alternator
• Socket 3~
• Socket 1~
• Ground fault interrupter
• Thermal shut off

Options on request

• 400V Plug
• 230V Plug
• 48V Plug
• Welding kit (mask, gloves, etc.)
• Welding cables: K190 (10+8m, 35mm²)

                            K200 (20+15m, 35mm²)

• PB3 battery holder complete with battery
• Earthing kit
• Trolley CTM6/2

Technical data

D.C. WELDING (Costant Current)

Current range, continuous: 20÷100 A / 90÷190A

Service: 190 A 35% - 160 A 60% - 120 A 100%

Duty cycle: 98 V

A.C. GENERATION - 50Hz: Three-phase asyncronous alternator, self-regulated, self-excited, brushless

Three-phase generation: 6 kVA / 400 V / 8.7 A

Single-phase generation: 5 kVA / 230 V / 21.7 A

Single-phase generation: 2 kVA / 48 V / 41.6 A

Insulation class: H

ENGINE: Diesel, 4-stroke, direct injection, air cooled

Model: Yanmar L 100 N

*Output: 6.5 kW (8.8 HP)

Speed: 3000 rpm

Displacement / Cylinders: 435 cm³/ 1

Fuel consumption (welding 60%): 1 l/h

*Maximum output (not overloadable) according to ISO 3046/1

GENERAL SPECIFICATIONS

Tank capacity: 5.5 l

Running time (welding 60%): 5.5 h

IP protection degree: IP 23

*Dimensions LxWxH (mm): 900x550x622

*Dry weight: 130 kg (TS 200 DS/CF)

                    131 kg (TS 200 DES/CF)

**Acoustic power LwA (pressure LpA): 98 dB(A) (73 dB(A) @ 7 m)

*Values shown do not include trolleys. **For fixed installation only