TS 415 VSX-BC

• Arc welding source in D.C. welding
• Welds any type of electrode, including cellulosic
• Electronic regulation of welding current
• Special BC (Base Current) circuit for pipes descending welding
• Double welding range (20A-200A / 20A-400A)
• A.C. generator, single-phase and three-phase
• Aux power also available while welding
• Ground fault interrupter
• Engine Diesel VM MOTORI 1500 rpm
• Engine protection ES
• Silenced
• Site tow CTL22 (on request)
• Welding remote control (optional)
• Meets EC directives for noise and security

Standard equipment

• Diesel Engine
• Air cooling
• Electric starter
• Battery 12V
• Engine protection
• Low press. Shutdown
• High temp. engine shutdown
• Battery charge alarm
• Low fuel indicator
• Fuel level gauge
• Hours-meter
• Asynchronous alternator
• Welding current electr. Regulation
• Base current diode bridge
• Arc control kit
• Socket 3~
• Socket 1~
• Output 48 V
• Ground fault interrupter
• Thermal shut off
• Voltmeter
• Ready for TC
• Central lifting eye

Options on request

• 400V Plug
• 230V Plug
• 110V Plug
• Tank locking cap
• Welding cables: K400 (20+15m, 50mm²)
• Remote control: TC2 (cable 20m) - TC2/50 (cable 50m)
• Welding kit (mask, gloves, etc.)
• Cyclone air pre-filte
• Earthing kit
• Site tow CTL22
• Road trolley CTV1

Version on request

• Auxiliary output: 400Y - 230I - 48I : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE - 1x230V 16A 2P+T CEE
• Auxiliary output: 400Y - 230I - 110I CTE : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE - 1x110V 32A 2P+T CEE - 1x110V 16A 2P+T CEE

Factory installation option

• Arc control kit
• Arc Gouging dedicated socket

Technical data

D.C. WELDING (Costant Current)

Current range, continuous: 20÷400 A

Service: 400 A 35% - 350 A 60% - 300 A 100%

Duty cycle: 70 V

A.C. GENERATION - 50Hz: Three-phase asyncronous alternator, self-regulated, self-excited, brushless

Three-phase generation: 16 kVA / 400 V / 23.1 A

Single-phase generation: 12 kVA / 230 V / 52.2 A

Single-phase generation: 6 kVA / 110 V / 54.4 A

Single-phase generation: 5 kVA / 48 V / 104 A

Insulation class: H

ENGINE: Diesel, 4-stroke, aspirated, direct injection, air cooled

Model: VM motori SUN 2105 E2

*Output: 18.5 kW (25 HP)

Speed: 1500 rpm

Displacement / Cylinders: 1992 cm³/ 2

Fuel consumption (welding 60%): 3.6 l/h

*Maximum output (not overloadable) according to ISO 3046-1

GENERAL SPECIFICATIONS

Tank capacity: 60 l

Running time (welding 60%): 16.6 h

IP protection degree: IP 23

*Dimensions LxWxH (mm): 1720x980x1080

*Dry weight: 820 kg (TS 415 VS/EL-BC)

                       840 kg (TS 415 VSX/EL-BC)

**Measured acoustic power LwA (pressure LpA): 95 dB(A)(70 dB(A) @ 7m) (TS 415 VSX/EL-BC)

**Guaranteed acoustic power LwA (pressure LpA): 95 dB(A)(70 dB(A) @ 7m) (TS 415 VSX/EL-BC)

*Dimensions and weight without trolley/trailer. **Acoustic power according to European Directive 2000/14/EC. ***For fixed installation only