TS 350 YSX-BC

• Arc welding source in D.C. welding
• Welds any type of electrode, including cellulosic
• Electronic regulation of welding current
• Special BC (Base Current) circuit for pipes descending welding
• Double welding range (HALF/FULL - 50% / 100%)
• A.C. generator, single-phase and three-phase
• Aux power also available while welding
• Engine Diesel YANMAR water cooling
• Engine protection EP7
• Emergency Stop button
• Bunded base
• Site tow CTL400 (on request)
• Welding remote control (optional)
• Meets EC directives for noise and security

Standard equipment

• Diesel Engine
• Water Cooling
• Battery 12V
• Fuel level gauge
• Hours-meter
• Engine protection
• Electric starter
• Low press. shutdown
• High temp. engine shutdown
• Battery charge shutdown
• Low fuel shutdown
• Warning light for preheating glow plug
• Welding current electr. Regulation
• Base current diode bridge
• Socket 3~
• Socket 1~
• Output 48 V
• Ground fault interrupter
• Thermal shut off
• Voltmeter
• Emergency stop button
• Ready for TC
• Central lifting eye

Options on request

• 400V Plug
• 230V Plug
• 110V Plug
• Tank locking cap
• Welding cables: K400 (20+15m, 50mm²)
• Remote control RC2 (cable 20m) - RC2 90°(cable 20m)
• Remote control RCPL (with polarity change switch - cable 20m)
• Welding kit (mask, gloves, etc.)
• Remote control adaptor RC/TC
• Earthing kit
• Site tow CTL400
• Road trolley CTV4

Version on request

• Auxiliary output: 400Y - 230I - 48I : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE
• Auxiliary output: 400Y - 230I : 1x400V 32A 3P+N+T CEE - 1x230V 32A 2P+T CEE - 2x230V 16A 2P+T CEE
• Auxiliary output: 400Y - 230I - 110I CTE : 1x400V 32A 3P+N+T CEE - 1x230V 16A 2P+T CEE - 1x110V 32A 2P+T CEE - 1x110V 16A 2P+T CEE

Factory installation option

• Auto Idle - Economiser function
• Isometer
• Polarity change
• Schuko sockets
• Spark arrestor

Technical data

D.C. WELDING (Costant Current)

Current range, continuous: 20÷350 A

Service: 350A-35%; 320A-60%; 270A-100%

Duty cycle: 65 V

A.C. GENERATION - 50Hz: Three-phase asyncronous alternator, self-regulated, self-excited, brushless

Three-phase generation: 12 kVA / 400 V / 17.3 A

Single-phase generation: 7 kVA / 230 V / 30.4 A

Single-phase generation: 3.5 kVA / 110 V / 31.8 A

Single-phase generation: 5 kVA / 48 V / 104 A

Insulation class : H

ENGINE: Diesel, 4-stroke, direct injection, air cooled

Model: Yanmar 3 TNV 76

*Output: 16.5 kW (25.4 HP)

Speed: 3000 rpm

Displacement / Cylinders :116 cm³/ 1

Fuel consumption (welding 60%): 3.4 l/h

*Maximum output (not overloadable) according to ISO 3046-1

GENERAL SPECIFICATIONS

Tank capacity: 45 l

Running time (welding 60%): 13 h

IP protection degree: IP 23

*Dimensions LxWxH (mm): 1610x720x1110

*Dry weight: 535 kg

**Measured acoustic power LwA (pressure LpA): 92 dB(A) (67 dB(A) @ 7m)

**Guaranteed acoustic power LwA (pressure LpA): 93 dB(A) (68 dB(A) @ 7m)

*Dimensions and weight without trolley/trailer. **Acoustic power according to European Directive 2000/14/EC