Test

PORTACUT

PORTACUT

The Portacut is the perfect low cost oxyfuel flame cutting machine for a whole range of duties, ideal for applications which demand manoeuvrability and flexibility – in short, wherever a large machine is just too big for the job.

More details

  • For straight, curve, circle, bevel and multi-bevel cuts
  • Functions control by forward/off/reverse switch, clutch lever and speed adjustment knob.
  • Power source: AC 230V, 50/60 Hz
  • Motor: Consider-induction, AC 230V, 10 W
  • Speed control: single cone system.
  • Weight: 9,5 kg/20.9 lbs.
  • Coating thickness: 3-300 mm
  • Cutting speed: 50-800 mm/min
  • Strip cutting range: 80-300 mm

 

• PORTACUT machine without rail track, with one  injector cutting torch for fuel gas acetylene: 716.51782

• PORTACUT machine without rail track, with one injector cutting torch  for fuel gas propane and natural gas: 716.51783

• Portacut machine without rail track, with one nozzle-mix cutting torch for all fuel gases: 716.51784

• Rail track with interlocking sections:

   length 1200mm / 47 inches: 716.51790

   length 1800mm / 71 inches: 716.52018

• Injector machine cutting torch MSZ 832/110-A for fuel gas acetylene:  716.51787

• Injector machine cutting torch MSZ 832/110-PMYF for fuel gas propane and natural gas: 716.51788

• Nozzle-mix machine cutting torch MSIDZ 110-A/PMYF for all fuel gases: 716.51789

• Adjusting valve for heating oxygen, G1/4 RH: 718.00500

• Adjusting valve for cutting oxygen, G3/8 RH: 718.00501

• Adjusting valve for fuel gas G3/8 LH: 718.00502

• Flashback arrestor for heating oxygen, G 1/4 RH: 0.463.389

• Flashback arrestor for cutting oxygen, G 3/8 RH: 0.463.384

• Flashback arrestor for fuel gas, G 3/8 LH: 0.463.388

• Extended rack bar: 716.51791

• Counter weight: 716.51792

• Circle cutting attachment, diameter 30-2400mm / 1.2-96”: 716.51793

• Standard hose package, 730 mm: 716.51929

• Extended hose package, 950 mm: 716.51930

• Cross feed torch holder for strip and multi bevel cuts: 716.51794