MIG/MAG Welding Torches MB EVO PRO
MB EVO PRO. The standard redefined …
Tough working conditions are to be expected when MIG/MAG welding.
Test
Browse our products by
Tough working conditions are to be expected when MIG/MAG welding.
Despite their lower weight and sophisticated design, the new MB EVO PRO torch line sets new benchmarks for strength and durability. Featuring newly designed, more robust fittings and improved space inside the handle for ease of servicing. Technology for professionals.
Air cooled MB EVO PRO welding torches feature the reduced weight “BIKOX®LW” cable assembly, for even better handling and scientifically proven reduced operator fatigue, in all welding positions. Improved handling and reduced strain have been shown to have a measurable impact on weld seam quality.
The appeal of liquid cooled MB EVO PRO torches is further enhanced due to the redesigned cooling concept and selected material combination. Improved front end cooling increases wear part service life and realises extra performance reserves, enabling welding at higher power outputs.
Technical data (EN 60 974-7):
Type: | MB EVO PRO 15 |
MB EVO PRO 24 |
MB EVO PRO 25 | MB EVO PRO 26 | MB EVO PRO 36 |
Rating | |||||
CO2: | 180 A | 250 A | 230 A | 270 A | 320 A |
Mixed gases M21*: | 150 A | 220 A | 200 A | 240 A | 290 A |
Duty Cyle (%): | 60 | 60 | 60 | 60 | 60 |
Wire Ø (mm): | 0.6 - 1.0 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 |
* according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%.
Technical data (EN 60 974-7):
Type: | MB EVO PRO 240 D | MB EVO PRO 401 |
MB EVO PRO 401 D |
MB EVO PRO 501 | MB EVO PRO 501 D |
Rating | |||||
CO2: | 325 A | 475 A | 450 A | 575 A | 550 A |
Mixed gases M21*: | 300 A | 425 A | 400 A | 525 A | 500 A |
Duty Cycle (%): | 100 | 100 | 100 | 100 | 100 |
Wire Ø (mm): | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 | 1.0 - 1.6 | 1.0 - 1.6 |
* according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%. Recommended cooling capacity of water recirculator approx. 800 W. To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes.