Test

MIG/MAG Welding Torches MB EVO

MIG/MAG Welding Torches MB EVO

MB EVO. The classic line …

The MB EVO torch series stands for a completely new handling concept that goes down new roads with regard to form and function. The welding torch forms a strong unit together with the welder‘s hand.

More details

The unique ergonomics as interplay between handle, trigger position, trigger design and ball joint construction guarantees a good feeling for welding in all working positions as well as the best results.

MIG/MAG Welding Torches MB EVO, air cooled:

  • Genuine two-component handle – robust and ergonomical
  • Optimum trigger position and tapered handle design – for precise and safe handling
  • Special internal geometry with air cooled torches – for “cool” handles and maximum mechanical strength
  • Proven “MB” wearing part concept – for a long service life
  • Solid, size-optimised central connector


MIG/MAG Welding Torches MB EVO, liquid cooled:

  • Genuine two-component handle – robust and ergonomical
  • Proven “MB” wearing part concept and media hoses
  • Optimum trigger position, tapered handle design and sophisticated ball joint construction – for best handling in all welding positions
  • Easy to repair construction down to the last detail – best space conditions for the simplest maintenance measures
  • Solid, size-optimised central connector with protected hose guide

 

MIG/MAG Welding Torches MB EVO, air cooled

Technical data (EN 60 974-7):

Type: MB EVO 15

MB EVO 24

MB EVO 25 MB EVO 26 MB EVO 36
Rating          
CO2: 180 A / 150 A 250 A 230 A 270 A 320 A
Mixed gases M21*: 180 A / 150 A 220 A 200 A 240 A 290 A
Duty Cycle (%): 35 / 60 60 60 60 60
Wire Ø (mm): 0.6 - 1.0 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2

 

* according to DIN EN ISO 14175

Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%.

 

MIG/MAG Welding Torches MB EVO, liquid cooled

Technical data (EN 60 974-7):

Type: MB EVO 240 D MB EVO 401

MB EVO 401 D

MB EVO 501 MB EVO 501 D
Rating          
CO2: 300 A 450 A 400 A 550 A 500 A
Mixed gases M21*: 270 A 400 A 350 A 500 A 450 A
Duty Cycle (%): 100 100 100 100 100
Wire Ø (mm): 0.8 - 1.2 0.8 - 1.2 0.8 - 1.2 1.0 - 1.6 1.0 - 1.6

 

* according to DIN EN ISO 14175

Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%. Recommended cooling capacity of water recirculator approx. 800 W. To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes.