TS EVO | TS EVO MULTI 4

TS EVO | TS EVO MULTI 4



The new engine driven welder TS-EVO andTS EVO MULTI4  are the most advancedresult of MOSA’s innovation and researchactivity, as well as the evolution of the TSwelder series, which contributed to therecognition of this brand across the world

More details

TS EVO:THE NEW STANDARDIN ON-SITE WELDING 

 Designed for professional use, the TS EVO rangeis available with power ranging from 300 to 600Amperes, in 5 different models.Powered by air or water-cooled diesel enginesfrom leading international brands, they allowmanual metal arc welding in Direct Current orscratch start DC TIG welding, ensuring highquality results.

 

 

WELDING MODE: CC (CONSTANT CURRENT)

WELDING PROCESSES: MANUAL METAL ARC / STICK  (SMAW)   SCRATCH START DC TIG (GTAW)

 

 

  • 300 to 600 A models
  • KÖHLER/PERKINS/DEUTZ water or air-cooled   diesel engines 3000 & 1500rpm

 

 

 

  • 10-pin connector for remote welding control
  • Optional: reverse polarity function inversion,   digital voltmeter and welding ammeter

 

 


TS EVO MULTI4:MULTI-PROCESS,INFINITE ADVANTAGES

The engine driven welders of the TS EVO MULTI4 range are multi-process machines that allow youto choose the most suitable welding mode according to the specific requirement with the certainty ofalways achieving the highest quality results.They are available in 5 different models with welding outputs ranging from 300 to 500 Amps. There isalso a 2x280 Amp dual-operator model, a versatile model which allows operation of the machine foruse with one or two welding operators.All the machines in the TS EVO MULTI4 range are powered by water or air-cooled diesel engines fromleading international brands.

 

 

 

WELDING MODE:  CC (CONSTANT CURRENT) / CV (CONSTANT VOLTAGE)WELDING PROCESSES:  - MMA MANUAL METAL ARC / STICK (SMAW)
    - MIG (GMAW)
   - FLUX CORED (FCAW)
    - TIG (GTAW)

 



 

  • 300 to 500 A models and a 2x280 dual-operator
  • KÖHLER/PERKINS/KUBOTA water or air-cooled   diesel engines 3000 & 1500rpm
  • 10-pin connector for remote control
  • 14-pin connector for wire feeder

  

THE DIGITALCONTROLPANEL 

A RATIONAL, EASY TO USE CONTROL PANEL,COMPLETE WITH ALL THE CONTROLSFOR MANAGING THE VARIOUS FUNCTIONSOF THE MACHINE.

The front panel of the new seriesTS EVO MULTI4 focuses on all the controlfunctions of the engine driven welder.Controls and indicators are set out in aclear, rational way ensuring quick andeasy selection of welding parameters bythe operator.

 

 

1. Welding process selector knobprotected against mechanical shocks

2. Digital welding Voltmeterand AmmeterFour digit LED display with actualvalues of welding, compensatedtemperature and brightnessIndication of pre-settings

3. VRD function - LED

4. Function indicators - LED

5. Welding voltage and currentadjustment knob protected against mechanical shocks

6. Welding load parametersPossibility to store up to 3 programsfor each welding process