Test

ABIPLAS CUT 200 W MT

ABIPLAS CUT 200 W MT

WEAR PARTS STANDAR :

  • ABIPLAS CUT 200 W MT Single connector (6m)= BNZ - 758.1012
  • ABIPLAS CUT 200 W MT Single connector (12m)= BNZ - 758.1019
  • ABIPLAS CUT 200 W MT Central connector (6m)= BNZ - 758.1015
  • ABIPLAS CUT 200 W MT Central connector (12m)= BNZ - 758.1020



More details

  • Type of cooling: liquid cooled
  • Pilot current: 15–27 A (max. 29 A)
  • Rating: 200 A / 160 A (at 100% Duty cycle)
  • Type of gas: Compressed air
  • Working pressure: 3.5–4.5 bar / 3.5 bar
  • Air value defined with
  • nozzle size 1.8 mm:

   – Plasma air: approx. 39 l/min. / approx. 21 l/min.

   – Soft start air: ≥ 15 l/min.

  • Gas post flow: ≥ 20 sec.
  • Type of ignition: HF
  • Gas supply: Compressed air for plasma gas
  • Ignition voltage: 7 kV
  • Cutting thickness: max. 70 mm at 200 A / max. 60 mm at 160 A depending on material tobe cut and power source